Matching the drive to a 1 kW motor on single- or three-phase 200-240 V
The 6SL5510-1BB11-0AA0 sits in the Siemens SINAMICS S200 line as a pulse-train-input servo converter sized for a 1 kW motor, with a 4.4 A output rating and an output frequency range of 0-550 Hz. The 200-240 V supply window tolerates -15% to +10% on either single-phase or three-phase input, so it can drop into a 230 V single-phase shop feed as readily as a balanced three-phase panel — the motor sizing is set by the 1 kW label, not the phase count.
Panel fit and the IP20 enclosure question
The converter body is 60 mm wide by 170 mm high by 195 mm deep, and ships in a carton measuring 237.00 x 99.00 x 249.00 mm. That footprint follows the SINAMICS compact-book format — narrow enough to sit alongside a small PLC and a line filter on a shared DIN backplane, though IP20 means it belongs inside a closed cabinet rather than on the machine skin. Product class A on this listing means a standard stock item that Siemens will accept back within the normal returns window if the order is wrong — useful when a controls integrator discovers at commissioning that the motor rating is off and a different S200 frame is needed. The unit ships one per package, so spares should be ordered by piece count, not reel or tray multiples.
Compliance paperwork for the documentation pack
Export control sits at AL:N / ECCN:N, which keeps cross-border paperwork straightforward for the usual destinations. The internal Siemens group code R220 and product group X0H8 are the keys to cut a clean trace from the purchase order into Siemens' logistics system — worth putting both on the PO line so the receiving dock can match the nameplate against the shipping document without a phone call.