Where this SINAMICS S200 fits at the panel
The 6SL5510-1BE10-4AF0 is a SINAMICS S200 servo converter in the FSA frame, 50 mm wide by 180 mm tall by 200 mm deep, with PROFINET on the control side and a 380-480 V three-phase AC input at 1.3 A — sized for a 0.4 kW motor on the output side, with 0-550 Hz available to the drive. The 1.3 A input at 380-480 V 3AC with a -15/+10 % tolerance is the rating a panel builder sizes the feeder breaker and line reactor against; the 0-550 Hz output ceiling sets the maximum speed command the drive will hand to a connected servo motor before it clamps.
Commissioning-day defaults and what to verify on first power-up
The drive ships under SINAMICS S200 firmware as an active, stock-class A product (returnable within the standard returns window), in single-piece packaging — so unbox-to-power-up is the path a commissioning engineer walks before the PROFINET name and IP get assigned. On the control side, the first thing to confirm is the PROFINET device name and the slot assignment; on the power side, the input tolerance window of 380-480 V 3AC at -15/+10 % is wide enough to ride through a lightly loaded plant bus, but a sagging transformer secondary under motor inrush will push the DC bus out of the regulation range and trip the drive on undervoltage — measure the line-to-line voltage at the drive terminals, not at the feeder.
Lifecycle read and how this part is quoted
Group code R220 and product group X0H6 are the internal Siemens classification keys that show up on the packing list and the invoice line — they confirm the part number decodes to the SINAMICS S200 family, 0.4 kW class, PROFINET variant, which is the cross-check a receiving inspector runs before the converter goes on the shelf.