The 7ME3960-0CR05 is the clamp-on RTD cable for the SITRANS FS220 ultrasonic flowmeter family. It carries the RTD signal from the pipe-mounted clamp-on sensor back to the flow transmitter, rated for -40 to +200 °C (-40 to +392 °F) service. The cable length is 61 m (200 ft), which covers most meter-run distances between the flow spool and the transmitter cabinet without a junction box.
Compliance signal — RoHS matters here
This cable is not RoHS-compliant. If your site or end customer requires RoHS conformity for the flowmeter installation, this accessory will not pass that gate. REACH Article 33 information is available on request. Export control is straightforward: AL: N / ECCN: EAR99I, no special license needed.
The 61 m cable length is the key fit parameter — it's the maximum distance the RTD signal can run before the transmitter sees enough resistance drop to affect accuracy. If your run is shorter, the extra coil is manageable; if it's longer, you need a different cable or a remote transmitter. The -40 to +200 °C range covers steam tracing and outdoor winter conditions, but the cable jacket material (not specified here) should be verified against chemical exposure in the trench or tray.