Skip to main content
Fuji Electric FRN0261G2W-4GU

FRN0261G2W-4GU Fuji FRENIC-Eco VFD, 200 hp, 240 A

MPN FRN0261G2W-4GU

Fuji Electric FRENIC-Eco series, FRN0261G2W-4GU, 200 hp variable frequency drive, 240 A output, 380-480 VAC three-phase input, NEMA 1 enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

FRN0261G2W-4GU specifications
ParameterValue
SeriesFRENIC - Eco
Input typeAnalog; Digital
Output signalAnalog; Digital
Control typeKeypad, Remote
Display typeLCD/LED
Voltage480 V AC
Input voltage460 V AC
Input voltage range380 V-480 V AC +10% / -15%
IP ratingNEMA 1
ColorBlue
ApplicationHV AC
I/O channels(7) Digital; (3) Analog
Control methodVariable Frequency Control

Product details

Drive specs for the line-down decision

The Fuji FRN0261G2W-4GU is a 200 hp variable frequency drive from the FRENIC-Eco series, rated for 240 A continuous output on a 380-480 VAC three-phase supply. That 240 A is the number that governs the motor branch circuit — match it to the full-load amp rating of your 200 hp motor, not the nameplate horsepower alone. The drive accepts 380-480 VAC +10%/-15% and delivers 0-460 VAC output over a 0.1 to 120 Hz frequency range, so it covers 50/60 Hz line supplies and can overspeed a standard motor if the load allows. This is a variable-torque drive, meaning it's optimized for centrifugal loads like fans and pumps in HVAC applications. The starting torque is 50% at 1 Hz, which is typical for a variable-torque curve — enough to accelerate a fan wheel unloaded, but not for a high-breakaway conveyor or extruder. If your load requires constant torque across the speed range, this drive will need derating; the FRENIC-Eco series has a constant-torque sibling that would be the correct pick.

I/O and control — what connects where

The drive has 7 digital inputs, 3 analog inputs, 5 digital outputs, and 2 analog outputs. No Ethernet port is included. Control is via the keypad or remote contacts. The keypad shows motor speed in percent, output frequency, output current, output voltage, alarm codes, and function codes — enough for commissioning and basic fault-finding without a laptop. For remote operation, the drive accepts a dry-contact start/stop signal. The dynamic braking circuit is present, but no brake chopper is included — if you need rapid deceleration on a high-inertia fan, you'll add an external braking unit and resistor.

MPN
FRN0261G2W-4GU