Skip to main content
Mitsubishi Electric AJ65BTB2-16DR

Mitsubishi AJ65BTB2-16DR Remote I/O Station, 8 In/8 Out, DC

MPN AJ65BTB2-16DR

Mitsubishi AJ65BTB2-16DR remote I/O station, 8-point DC input / 8-point relay output, rated 70 mA at 24 VDC, switching up to AC 250 V / DC 110 V.

$265.65 – $328.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

AJ65BTB2-16DR specifications
ParameterValue
Station typeO station, Remote I
Input common type8 points / common (terminal trapezoid 2 wire type)
Current70 mA or less (TYP. At 24 VDC)
Installation locationIn the control panel
Temp storage max75 °C
Temp storage min-20 °C
Temp operating max55 °C
Temp operating min0 °C
Pollution degree2 or less
Depth46 mm
Width197.4 mm
Output common method8 points / common (terminal trapezoid 2 wire type)
Input isolation methodPhotocoupler isolation
Output isolation methodPhotocoupler isolation

Product details

What it is for the line-down swap

When a remote rack goes dark at 2am, this is the Mitsubishi AJ65BTB2-16DR you're after. It's an 8-in / 8-out remote I/O station that talks on the MELSEC network. Draws 70 mA typical from the 24 VDC bus. Inputs are sink/source configurable, plus common. Outputs are relay, rated for AC 250 V or DC 110 V at up to 1.5 A resistive. Photo-isolated both sides. The spec says 3600 cycles per hour max, so don't hammer it faster than that.

Panel fit notes

Mounts inside the control panel on a DIN rail (depth 46 mm, width 197.4 mm, height 65 mm). Accepts 24 VDC supply with 15.6 to 28.8 V range. Inputs consume about 7 mA each at 24 V. Output common per 8 points, terminal block style.

Ordering this for a BOM

Available through our network; we quote to order. No cross-reference needed — it's a current-production Mitsubishi part. Ensure your panel's overvoltage category is II or lower and pollution degree 2 or less per the spec.

MPN
AJ65BTB2-16DR