Skip to main content
Omron D40A-1C5

Omron D40A-1C5 Non-Contact Door Switch, IP67, PNP, 24V DC

MPN D40A-1C5

Omron D40A series, Non-Contact Door Switch, model D40A-1C5, IP67, PNP output, 24V DC, 10 mA, 5m cable.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

D40A-1C5 specifications
ParameterValue
SeriesD40 A
Product typeNon-Contact Door Switch
Supply voltage24 V DC
IP ratingIP67
Temp operating max55 °C
Temp operating min-10 °C
Weight0.2 kg
MaterialPBT Resin

Product details

Non-Contact Door Switch for Guard Monitoring

The Omron D40A-1C5 is a non-contact door switch from the D40A series, designed for monitoring guard positions on machinery. The IP67 protection class means the switch body and cable entry are sealed against dust ingress and temporary water immersion — suitable for washdown environments or outdoor cabinet applications where moisture is present.

The 10 mA output rating at 24 V DC is a low-current signal-level output, not a power-switching contact. It interfaces directly with a PLC digital input or a safety relay input module — not with a motor contactor coil. The PNP (sourcing) output is common in European-style control panels; verify your input card is configured for sourcing (positive-switching) inputs. Power consumption of 0.6 W keeps the thermal load negligible inside a control cabinet. The 5-wire, 5-meter cable provides power (two wires for supply and 0V), the PNP output, and typically two additional wires for a diagnostic or auxiliary output. The 5 m length is generous for mounting on a swing gate or sliding door where the switch travels with the guard.

Mounts directly on the machine frame or guard panel using the 48 x 13 x 25 mm body. No physical contact with the actuator target — the non-contact design eliminates wear from repeated door cycles. The PBT resin housing is impact-resistant and suitable for industrial environments where occasional knocks occur. The 5-meter cable routes through a cable gland or into a junction box near the door hinge. Keep the cable away from high-current power cables to avoid induced noise on the 24 V DC signal pair.

The D40A-1C5 is classified at a mature lifecycle stage.

MPN
D40A-1C5