Skip to main content
Omron E5CC-CX1DUM-000

Omron E5CC-CX1DUM-000 Process/Temp Controller, 24VAC/DC, PID

MPN E5CC-CX1DUM-000
Active

Omron E5CC series, Process/Temperature Controller, E5CC-CX1DUM-000, 24VAC/DC supply, dual-color LCD, analog + relay output, IP66 panel mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-CX1DUM-000 specifications
ParameterValue
SeriesE5CC
Output signalAnalog, Relay
Supply voltage24 VAC/DC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

The Omron E5CC-CX1DUM-000 is a panel-mount process and temperature controller from the E5CC series, accepting inputs from RTD and a wide range of thermocouples (B, E, J, K, L, N, PLII, R, S, T, U, W) as well as 0–20mA and 0–10VDC process signals, making it a dual-purpose unit for temperature loops or linear process variables. Control method is On/Off or PID, and the output is a combination of relay and analog, so you can drive a heater contactor and send a 4-20mA retransmission from the same unit. Supply is 24VAC/DC, and termination is via an octal 11-pin plug-in base — that matches the standard E5CC footprint, so swap-in is straightforward if you're already using this family.

Signal and environment notes

The IP66 front rating means the face survives hose-down and dust exposure — common in food or washdown areas — but the rear terminals still need a clean, dry enclosure. Dual display shows process value (0.600" digits) and setpoint (0.280" digits) in dual-color LCD; the high contrast helps reading from a distance in a bright panel. For thermocouple inputs, use the correct compensating cable and ground the shield at the controller end only — floating the field side avoids ground loops that drift the reading. If you're sourcing a 4-20mA signal from a transmitter, check the input burden; the controller is typical for this class, but confirm with the manual if your loop has long cable runs.

The panel cutout is a standard 45mm square, and the octal base is common across the E5CC family, so if you need a different output mix or supply voltage later, the mechanical and wiring pattern stays the same.

MPN
E5CC-CX1DUM-000