Skip to main content
Omron E5CC-CX3D5M-5804U

Omron E5CC-CX3D5M-5804U Temperature Controller, 24VAC/DC, RS

MPN E5CC-CX3D5M-5804U
Active

Omron E5CC series, Process / Temperature Controller, 24VAC/DC, RS-485, Analog + 3 Relay outputs, IP66, Panel Mount 45mm, Starter Kit (Controller, Cable, Software).

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-CX3D5M-5804U specifications
ParameterValue
SeriesE5CC
Output signalAnalog, Relay (3)
Supply voltage24 VAC/DC
IP ratingIP66
ProtocolRS-485 (CompoWay/F, Modbus)
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

Omron E5CC-CX3D5M-5804U — 24V temperature controller with RS-485 and starter kit

The E5CC-CX3D5M-5804U is a 24 VAC/DC temperature and process controller from Omron's E5CC series, active and in production. It includes a starter kit with controller, cable, and software — meaning less procurement legwork for a first-fit or spare. It accepts RTD, ten thermocouple types (B, E, J, K, L, N, PLII, R, S, T, U, W), plus 0–20 mA or 0–10 VDC process inputs. Outputs are one analog signal and three relay contacts — enough for a heater, alarm, and aux cooling valve without adding a remote I/O brick. Communication is RS-485 using CompoWay/F or Modbus, so it drops onto most PLC backbones without a gateway. The dual-color LCD shows two rows of four characters each — process value up top, set point below.

How it compares with E5CC-CQ3D5M-005

The E5CC-CQ3D5M-005 is the closest functional sibling. Both are 24 VAC/DC E5CC controllers with the same input range, RS-485, IP66 rating, and 45 mm panel cutout. The -005 adds an event input and a voltage pulse output for driving an external SSR — its third output is a transistor pair, not an analog signal. If your panel was wired expecting a voltage pulse to an SSR, the -5804U's analog output (0–20 mA / 0–10 V) will not drive it directly — you would need a signal converter or a different module. For applications that use only the three relay outputs and don't need the event input, the -5804U is a drop-in mechanically and electrically on the power and bus sides.

Active production — no LTB pressure

Active status — no end-of-life notice issued. Order against an RFQ for lead time confirmation.

Panel cutout is a standard 45 mm square — fits existing E5CC cutouts. The IP66 front gasket seals against washdown; operating range is -10°C to 55°C. Screw terminals accept standard field wiring.

MPN
E5CC-CX3D5M-5804U