Skip to main content
Omron E5CC-QQ3A5M-003

Omron E5CC-QQ3A5M-003 Temperature Controller, PID, RS-485

MPN E5CC-QQ3A5M-003
Active

Omron E5CC series, Process / Temperature Controller, PID control, relay (3) + voltage (external SSR) (2) outputs, RS-485 CompoWay/F Modbus, 100~240VAC, panel mount, IP66 front, screw terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-QQ3A5M-003 specifications
ParameterValue
SeriesE5CC
Output signalRelay (3), Voltage (External SSR) (2)
Supply voltage100 to 240VAC
IP ratingIP66
ProtocolRS-485 (CompoWay/F, Modbus)
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBox
Control methodOn/Off, Proportional (PID)

Product details

Panel cutout and wiring decision

The Omron E5CC-QQ3A5M-003 is a 1/16 DIN process and temperature controller that fits a standard 45.00 mm x 45.00 mm square panel cutout. The screw-terminal termination means no special crimp tooling on the line — strip and torque to the terminal block. It accepts universal inputs: RTD (Pt100), thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W, plus 020 mA and 010 VDC process signals. That range covers -200°C to 2300°C, so one part number handles furnace thermocouples and chilled-water RTDs without a separate signal conditioner.

Outputs and control loop

Three relay outputs handle alarm, event, or auxiliary control, and two voltage-pulse outputs drive external SSRs for the heating and cooling legs. That split is typical for a dual-loop or heat-cool application where the relays carry the on/off events and the SSR outputs modulate the power elements. Control method is selectable between on/off and proportional (PID). The PID autotune is standard on the E5CC series — the controller learns the process dynamics on first run and sets gains without a manual Ziegler-Nichols calculation.

Fieldbus and diagnostics

RS-485 communications support both Omron CompoWay/F and Modbus RTU protocols. That means it drops into a Modbus RTU network directly — no gateway or protocol converter needed between the controller and the PLC. The heater fault detection feature monitors current draw on the load and flags a broken heater or SSR short. On an oven or extruder barrel, that alarm prevents a cold zone from going unnoticed until the product is scrap. The dual-color LCD backlight shows four characters per row in two rows, with the main PV in 0.600" digits and the SV in 0.280" digits — readable from across a panel.

The IP66-rated front panel withstands washdown splashes and dust ingress, so it suits food-and-beverage or pharmaceutical panel environments where a standard IP54 controller would need a separate cover. Sourced to order against the BOM quantity.

MPN
E5CC-QQ3A5M-003