Skip to main content
Omron E5CC-QX2ASM-802

Omron E5CC-QX2ASM-802 Temperature Controller, Relay/Voltage

MPN E5CC-QX2ASM-802
Active

Omron E5CC series process/temperature controller, box pack, 100-240 VAC supply, dual relay + voltage (SSR) outputs, RS-485 Modbus, IP66 front panel, 45 mm square cutout.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-QX2ASM-802 specifications
ParameterValue
SeriesE5CC
Output signalRelay (2), Voltage (External SSR)
Supply voltage100 to 240VAC
IP ratingIP66
ProtocolRS-485 (CompoWay/F, Modbus)
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
PackageBox
Control methodOn/Off, Proportional (PID)

Product details

What the E5CC-QX2ASM-802 brings to the panel

The E5CC-QX2ASM-802 is an Omron E5CC series 1/16 DIN process controller that accepts RTD, thermocouple (Types B, E, J, K, L, N, PLII, R, S, T, U, W), 0–20 mA, or 0–10 VDC inputs — spanning -200°C to 2300°C plus analog process signals. That means one SKU covers most temperature loops and a fair share of pressure/level retransmit signals, so you can standardise the BOM position across multiple machine types. The dual relay outputs handle on/off or PID control of contactors or solenoid valves, while the voltage pulse output drives an external SSR directly — no interposing relay needed for the SSR leg. This is the common configuration for a heater zone: one relay for alarm or cool, the SSR output for the heating element.

Comms, cutout, and environmental seal

RS-485 with CompoWay/F and Modbus protocols is built in — no add-on comms module to order separately. The Modbus RTU link lets a PLC or SCADA read PV, setpoint, and status, and write setpoint or mode changes over the same two wires that carry the loop. The IP66 front-panel seal means the controller survives washdown spray and dust ingress when mounted in a panel with the gasket compressed. The 45.00 mm x 45.00 mm square cutout is the standard 1/16 DIN hole — drops into the same punch as any E5CC or legacy E5CS without panel rework. The dual-colour LCD backlight shows four characters per row, with a 0.600" (15.20 mm) upper row for PV and a 0.280" (7.10 mm) lower row for SV or status — readable from across a machine cell.

Sourced to order against RFQ quantities.

MPN
E5CC-QX2ASM-802