Skip to main content
Omron E5CC-TCQ3D5M-001

Omron E5CC-TCQ3D5M-001 Process Controller, 24VAC/DC, PID

MPN E5CC-TCQ3D5M-001
Active

Omron E5CC-TCQ3D5M-001 process/temperature controller, E5CC-T series, 24VAC/DC, PID control, 3 relay + analog + SSR outputs, IP66 front panel, 45mm square cutout.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-TCQ3D5M-001 specifications
ParameterValue
SeriesE5CC-T
Supply voltage24 VAC/DC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

Sensor input flexibility and what it means for your loop

The E5CC-TCQ3D5M-001 accepts RTD and 13 thermocouple types (B, E, J, K, L, N, PLII, R, S, T, U, W) plus linear analog signals 0-20 mA or 0-10 VDC. That covers virtually every common process sensor — you can standardise one controller across multiple loop types without stocking different models. Input range spans -200°C to 2300°C for thermocouples, so it handles both cryogenic and high-temperature kiln/oven applications. The 0-20 mA and 0-10 VDC ranges let it accept pressure, flow, or level transmitter signals as well.

Output architecture — three relays plus analog and SSR drive

Three relay outputs handle on/off control, alarm annunciation, or valve positioning. The analog output (likely 4-20 mA or 0-10 VDC) provides a retransmitted process value or drives a proportional valve/actuator. The voltage pulse output fires an external SSR for fast-cycling heater loads — this combination means you don't need a separate signal conditioner or output expander for most single-loop applications. Control method is selectable between On/Off and proportional (PID). The PID algorithm includes auto-tuning, so commissioning is straightforward: wire the sensor and output, initiate the tune cycle, and the controller sets its own P, I, and D terms.

Screw terminal connections simplify field wiring. IP66 front-panel rating means the display and keypad survive hose-down cleaning and dusty environments. The operating range is -10°C to 55°C, adequate for most indoor control panels but not for direct outdoor exposure without a weatherproof enclosure.

Heater fault detection and event input

Heater fault detection monitors the load current via an external CT and flags a broken heater or SSR short-circuit — critical for electric heaters where an undetected failure can cause process drift or safety issues. The event input allows remote switching between two setpoints or starting/stopping the control action, useful for interlocking with a safety circuit or a higher-level PLC.

MPN
E5CC-TCQ3D5M-001