Skip to main content
Omron E5CC-TQQ3A5M-001

Omron E5CC-TQQ3A5M-001 Temperature Controller, PID

MPN E5CC-TQQ3A5M-001
Active

Omron E5CC-TQQ3A5M-001, Process / Temperature Controller, E5CC-T series, universal input with relay and voltage (SSR) outputs, 100-240VAC supply, IP66 front panel.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-TQQ3A5M-001 specifications
ParameterValue
SeriesE5CC-T
Output signalRelay (3), Voltage (External SSR) (2)
Supply voltage100 to 240VAC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

Universal input, three relay outputs, two SSR drives

The Omron E5CC-TQQ3A5M-001 is a 1/16 DIN process and temperature controller that accepts RTD, ten thermocouple types (B, E, J, K, L, N, PLII, R, S, T, U, W), plus 0-20mA and 0-10VDC linear inputs. That covers the vast majority of industrial temperature sensing without needing a separate signal conditioner — one SKU for the whole line. Outputs are three relay contacts and two voltage pulses for external SSRs. The relay bank handles on/off or alarm duties; the SSR drives run the heating element through a solid-state contactor, which gives longer life on cycling loads than a relay alone.

PID with event input and heater fault detection

Control method is selectable between On/Off and proportional (PID) with auto-tune. The PID loop is standard for tight temperature regulation in ovens, extruders, and packaging seal bars. An event input lets a PLC or limit switch force a preset run/hold/stop state — useful for recipe changeovers or interlocking with a safety circuit. The heater fault detection monitors current draw and flags a broken heater or SSR short before the process drifts out of spec.

Panel cutout is 45.00mm x 45.00mm square — the standard 1/16 DIN hole. The front bezel carries an IP66 rating, so it withstands washdown spray and dust in food, beverage, or chemical processing environments. Dual-color LCD backlight with four digits per row (0.600" and 0.280" character heights) shows process value and setpoint simultaneously. Screw-terminal connections — no special crimp tool needed for field wiring.

Active production — sourced to order

Lifecycle status is active per Omron. No end-of-life notice or successor part number on record. This is the current-production variant with event input and heater fault detection but no serial communications — if you need RS-485 (CompoWay/F or Modbus), the E5CC-TQQ3A5M-003 carries the same I/O with the comms port added. Sourced through independent distribution channels — no minimum buy, no factory lead-time deferral.

MPN
E5CC-TQQ3A5M-001