Skip to main content
Omron E5CC-TQX3A5M-003

Omron E5CC-TQX3A5M-003 Temperature Controller, PID, Modbus

MPN E5CC-TQX3A5M-003
Active

Omron E5CC-T series, Process / Temperature Controller, RTD/TC/mA/V input, Relay (3) + Voltage (SSR drive) outputs, RS-485 Modbus, 100-240 VAC, IP66 front.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-TQX3A5M-003 specifications
ParameterValue
SeriesE5CC-T
Output signalRelay (3), Voltage (External SSR)
Supply voltage100 to 240VAC
IP ratingIP66
ProtocolRS-485 (CompoWay/F, Modbus)
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

What the universal input actually saves you

The E5CC-TQX3A5M-003 accepts RTD, thermocouple types B/E/J/K/L/N/PLII/R/S/T/U/W, plus 0-20 mA and 0-10 VDC process signals — so you can stock one controller for a whole plant's worth of sensors instead of juggling six different order codes. That -200°C to 2300°C span covers cryogenic chambers right up to furnace thermocouples. Three relay outputs handle on/off or alarm functions, and the voltage pulse output drives an external SSR directly for PID control — no extra interposing relay needed between the controller and the heater contactor.

Modbus RTU and the heater fault check

RS-485 communication with both CompoWay/F and Modbus protocol means this controller talks to any PLC or SCADA that speaks Modbus RTU — no proprietary gateway required. The 100-240 VAC supply range lets it run on whatever line voltage your panel already carries. Built-in heater fault detection monitors the load current via an external CT and flags a broken heater or SSR short before the process drifts. For a small shop running a single oven or extruder barrel, that one feature can save a batch before you even know there's a problem.

The IP66 front face handles washdown splashes and dusty control cabinets; the screw terminals are accessible without pulling the controller from the panel. Dual-line LCD shows process value (0.600" digits) and setpoint (0.280" digits) simultaneously — four characters each row, so you see PV and SP at a glance without scrolling.

MPN
E5CC-TQX3A5M-003