Skip to main content
Omron F3SJ-A0300P25

Omron F3SJ-A0300P25 Safety Light Curtain, 300mm, 25mm Detect

MPN F3SJ-A0300P25
End of Life

Omron F3SJ-A Series safety light curtain, F3SJ-A0300P25, hand protection, 300mm protective height, 25mm detection capability, 0.2m-9m range, IP65.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A0300P25 specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

The 25mm detection capability means it reliably catches a finger or hand reaching into the guarded area — that's the standard finger/hand detection threshold per IEC 61496-2, not a fine-resolution finger sensor. The 300mm protective height and 20mm beam pitch (15 beams total) define the vertical zone it covers; the 0.2m to 9.0m operating range gives you flexibility in how far the emitter and receiver sit apart, so it fits both compact machinery and wider access points.

Built-in blanking and muting functions let you configure fixed or floating object bypass and presence sensing for material handling, so you don't need an external controller for those logic decisions. Mounting brackets and alignment aids are typical for this class; plan for the 300mm column height plus clearance for the emitter and receiver heads.

Signal integrity and installation notes

The emitter and receiver communicate via synchronized pulsed infrared. Keep the cables separated from VFD or motor power cables by at least 100mm to avoid noise injection into the safety output. The 24 VDC supply should be clean and within tolerance; a shared supply with inductive loads can cause dropouts that the curtain interprets as an interruption. Check the shield termination at the panel end only — floating the field end keeps ground loops out of the safety relay or PLC input card.

MPN
F3SJ-A0300P25