Skip to main content
Omron F3SJ-A0860P25

Omron F3SJ-A0860P25 Safety Light Curtain, 25mm Detection, 86

MPN F3SJ-A0860P25
End of Life

Omron F3SJ-A series safety light curtain, F3SJ-A0860P25, hand protection with 25mm detection capability, 860mm protective height, 0.2m to 9.0m range, IP65, 24VDC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A0860P25 specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

What the 25mm detection means for your guarding zone

That 25mm figure is the minimum object size it catches — anything smaller passes through undetected, so this is sized for finger and hand access, not whole-body or torso detection. The 20mm beam pitch and 43 beams give a protective height of 860mm, covering a typical reach-in zone on a machine guard. Operating range runs from 0.2m out to 9.0m. That means the emitter and receiver can be up to nine metres apart, which covers a wide machine opening, but the minimum 0.2m gap means you cannot push them right up against each other for a short guard — the optics need that two-hundred-millimetre window to lock the sync signal.

Built for the factory floor — IP65 and blanking

IP65 rating means the housing is dust-tight and handles water jets from any direction — think washdown on a packaging line or coolant mist around a machining centre. Not submersible, but it survives the spray-down that ends a shift. Blanking and muting functions are built in. Blanking lets the curtain ignore a fixed obstruction — a conveyor frame or a part fixture that sits inside the guarded area — without disabling the rest of the beams. Muting lets the curtain temporarily override itself when a pallet or workpiece passes through, so the machine does not stop on every material feed. Both are configured through the controller, not hard-wired.

MPN
F3SJ-A0860P25