Skip to main content
Omron K8AC-H21PN-FLK

Omron K8AC-H21PN-FLK Heater Element Detector, 0.20~2.20A

MPN K8AC-H21PN-FLK
Active

Omron K8AC-H series heater element detector, order code K8AC-H21PN-FLK, input range 0.20 ~ 2.20A, solid-state outputs, RS-485 CompoWay/F, DIN rail mount, 85 ~ 264VAC supply.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

K8AC-H21PN-FLK specifications
ParameterValue
SeriesK8AC-H
Output signalSolid State (2)
Display typeLED - Red Characters
Product typeHeater Element Detector
Supply voltage85 to 264VAC
ProtocolRS-485 (CompoWay/F)
MountingDIN Rail
Temp operating max55 °C
Temp operating min-10 °C
Weight0.441 lb (200.03 g)
PackageBulk

Product details

What it catches and why it matters

The Omron K8AC-H21PN-FLK is a dedicated heater element detector — it monitors the current drawn by a resistive heating load and flags a fault when the current drops outside the set window, meaning a broken heater element or a failed SSR that leaves the load unpowered. The input range of 0.20 ~ 2.20 A covers small to mid-size heaters typical in injection molding, packaging seal bars, and process ovens.

DIN-rail integration and communication

Mounts on standard DIN rail (snap-on) and terminates via spring terminals — no screw tightening, which speeds panel wiring and stays tight under vibration. The RS-485 interface uses Omron's CompoWay/F protocol, so the detector reports heater current and fault status to a PLC or HMI over a two-wire bus without running separate alarm wires back to the controller.

Power and environment

Runs on 85 ~ 264 VAC supply. The 4-digit red LED display shows the measured current in real time.

MPN
K8AC-H21PN-FLK