Skip to main content
SICK CM30-25NPP-EC1

CM30-25NPP-EC1 Capacitive Sensor, 25 mm, PNP, IP68/IP69K

MPN CM30-25NPP-EC1

Capacitive sensor, Series CM, CM30-25NPP-EC1, 25 mm sensing distance, PNP output 200 mA, 50 Hz switching, non-flush mount, IP68/IP69K, M12 4-pin connector.

$92.14 – $131.98 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

CM30-25NPP-EC1 specifications
ParameterValue
SeriesCM
Output current200 mA
IP ratingIP68 / IP69K
MountingNon Flush Mount

Product details

The CM30-25NPP-EC1 is a 30 mm cylindrical capacitive sensor from the Series CM family, rated for a 25 mm sensing distance on a non-flush mount. That 25 mm is the maximum detection range against a grounded metal target in the standard IEC 60947-5-2 test condition; for non-metallic media (liquids, powders, glass) the effective range drops to roughly 40–60% of that figure, so a 25 mm nominal means you design for about 10–15 mm of reliable detection on a plastic bottle or a grain level. The non-flush mounting requirement means the sensing face must protrude past any surrounding metal — embed it in a steel bracket and the field couples to the bracket, not the target. The PNP output switches 200 mA at 10–36 VDC, which is the standard sink for a PLC digital input or a relay coil in a 24 VDC control loop. At 50 Hz switching frequency it is a presence sensor, not a high-speed part — adequate for a conveyor jam or a tank-level gate, but not for counting parts on a fast pick-and-place. The IP68 and IP69K ratings mean the sensor body and the M12 connector withstand both continuous immersion (IP68, 1 m depth) and high-pressure, high-temperature washdown (IP69K, 80 °C water at 80–100 bar). That is the spec that decides fit for food-and-beverage, dairy, or pharmaceutical lines where a CIP (clean-in-place) cycle would destroy an IP67 sensor.

Deployment context

The M12 4-pin connector mates to a standard M12 cordset (A-coded, 4-pin, typically 0.34 mm² conductors) — no special breakout cable needed. The 30 mm barrel threads into a standard 30 mm hole or a bracket clamp; the non-flush rule means the sensing face must be the forward-most metal surface. In a washdown zone the IP69K rating holds provided the mating connector is also rated to IP69K and the cable gland is tightened to the manufacturer's torque spec. The 10–36 VDC supply range covers 24 VDC nominal with headroom for brownout conditions down to 10 V.

MPN
CM30-25NPP-EC1