Skip to main content
Siemens 3RK1400-1CD00-0AA2

Siemens 3RK1400-1CD00-0AA2 AS-Interface Module, 4I/4O PNP

MPN 3RK1400-1CD00-0AA2

Siemens AS-Interface communication module, 4 inputs / 4 outputs, PNP input circuit, 26.5...31.6V input voltage, IP00, 54mm depth, 75mm width, 9mm height.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1400-1CD00-0AA2 specifications
ParameterValue
Product type4 inputs / 4 outputs
Input voltage26.5 ... 31.6 V
IP ratingIP00
Depth54 mm
Width75 mm
Height9 mm

Product details

The Siemens 3RK1400-1CD00-0AA2 is an AS-Interface communication module designed for special integrated solutions — a board-level slave that brings 4 digital inputs and 4 digital outputs onto an AS-i network via a card-edge board-to-board connector. The input circuit is PNP, switching at 20...30V, with the module drawing its sensor supply and power from the AS-Interface cable itself. Outputs are solid-state, rated 700mA per channel at 24V DC, with built-in short-circuit protection and a freewheel diode for inductive loads.

I/O mapping and status at a glance

The four I/O channels map as D0=IN1/OUT1, D1=IN2/OUT2, D2=IN3/OUT3, D3=IN4/OUT4. The I/O configuration code is 7, and the ID/ID2 code is 0/F — a standard slave profile. LED status is straightforward: green for AS-i active, red for fault, yellow per channel for input/output state, and a separate green for 24V supply. The LED blink patterns tell you whether you've got healthy traffic, no data, a zero address, or a sensor overload on the bus.

Power budget and physical fit

Total AS-Interface current draw maxes at 270mA, and the combined current for all inputs and outputs is capped at 200mA. Outputs need an external 24V DC supply fed through the printed-circuit board contacts — the module doesn't generate that rail internally. Physically it's a slim profile: 75mm wide, 54mm deep, and only 9mm tall. The IP00 rating means no enclosure protection; this board lives inside a host device or panel, not exposed on the line.

MPN
3RK1400-1CD00-0AA2