Skip to main content
Siemens 3RS7000-1DE00

Siemens 3RS7000-1DE00 SIRIUS Signal Converter, 0...10 V to 4

MPN 3RS7000-1DE00
Active

Siemens SIRIUS 3RS7000-1DE00, single-range signal converter, active design, 0...10 V input to 4...20 mA output, snap-on mounting, 6.2 mm width, IP20, 0.29 W.

$158.64 – $300.89 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RS7000-1DE00 specifications
ParameterValue
Input voltage30 V
IP ratingIP20
MountingSnap-on Mounting
Depth72.5 mm
Width6.2 mm
Height93 mm
Channels1

Product details

The Siemens 3RS7000-1DE00 is a SIRIUS single-range signal converter that takes a 0...10 V input and outputs a proportional 4...20 mA current loop signal. It's an active design — meaning the output is powered from the loop, not just a passive resistor — and it draws 0.29 W from the input side. The 4...20 mA output is the industrial standard for long-distance transmission to a PLC analog input card, VFD, or remote I/O, and the 0...10 V input matches most sensor and controller voltage outputs.

The 6.2 mm width is the key number for panel fill: you can fit over 150 of these across a standard 1-meter rail section. Depth is 72.5 mm, height 93 mm, so it clears most shallow enclosures.

Signal integrity and accuracy

The temperature drift is 0.015 %/°C, which means over a 40 °C swing inside a panel the output shifts less than 0.6 % of span — good enough for most process monitoring but not precision metrology. The input voltage ripple is limited to 20 mV maximum; if your 0...10 V source has more ripple than that, you'll need a filter ahead of this converter. Rise time is 6 ms, so it responds fast enough for conveyor speed signals or pressure transients but not for high-speed servo feedback. Galvanic isolation exists between input and output, which prevents ground loops from corrupting the 4...20 mA signal — a common headache when mixing analog signals from different power supplies.

MPN
3RS7000-1DE00