Skip to main content
Siemens 3RS7002-1AE00

Siemens 3RS7002-1AE00 SIRIUS Signal Converter, 0-20 mA to 0-

MPN 3RS7002-1AE00
Active

Siemens SIRIUS 3RS7002-1AE00, single-range signal converter, 0... 20 mA input to 0... 10 V output, snap-on mounting, IP20, 93 x 6.2 x 72.5 mm.

$313.30 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RS7002-1AE00 specifications
ParameterValue
Input voltage30 V
IP ratingIP20
MountingSnap-on Mounting
Depth72.5 mm
Width6.2 mm
Height93 mm
Channels1

Product details

What this converter does on the line

The Siemens SIRIUS 3RS7002-1AE00 is a single-range signal converter that takes a 0... 20 mA input and outputs a proportional 0... 10 V signal. It is an active design, meaning it generates the output voltage from its own supply rather than just passing through a passive load. The minimum load resistance at the voltage output is 2 kΩ, so whatever reads that 0-10 V signal — a PLC analog input, a drive, a display — needs to present at least that impedance or the output accuracy drifts. Snap-on mounting to a standard DIN rail, 6.2 mm wide, so it takes one slot in a crowded panel. IP20, so it lives inside an enclosure — not on the wet side of the cabinet wall.

Signal path and isolation

Galvanic isolation between input and output is confirmed — the spec shows isolation between input and output is present. That means you can break ground loops between a 4-20 mA transmitter in the field and the 0-10 V input on a controller without lifting shields or adding external isolators. No isolation between the two input channels because there is only one channel — single-channel device. The input can be driven by either AC or DC voltage (type of voltage AC/DC), with the rated input voltage at 30 V. The setting ranges for the input threshold are 0.8... 1.1 for both AC at 50 Hz and AC at 60 Hz, and also for DC. The limit frequency is 30 Hz, so this is not a high-speed pulse converter — it is for steady-state or slowly varying process signals.

Mounting position is any — upright, sideways, upside down, the converter works. Clearance around the device: 0 mm upwards, 0 mm forwards, 0 mm backwards, 0 mm downwards, 0 mm at the side. That means it can sit tight against other DIN-rail components, no breathing space required. The height is 93 mm, depth 72.5 mm, width 6.2 mm.

MPN
3RS7002-1AE00