Skip to main content
Siemens 3RW3027-2BB14

Siemens 3RW3027-2BB14 SIRIUS Soft Starter, 32A, Size S0

MPN 3RW3027-2BB14
Active

Siemens SIRIUS 3RW3027-2BB14 soft starter, Size S0 frame, 32 A at 40 °C, 45 mm width, 150 mm depth, screw and snap-on DIN rail mounting, spring-loaded terminals, integrated bypass, 110-230 V DC control supply.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW3027-2BB14 specifications
ParameterValue
Mountingscrew and snap-on mounting
Depth150 mm
Width45 mm
Height150 mm

Product details

Panel fit and mounting — Size S0 frame

The 3RW3027-2BB14 is a Size S0 frame soft starter, 45 mm wide, 150 mm deep, and 150 mm tall. Mounting position allows ±10° rotation and ±10° tilt forward/back from vertical. Clearance requirements: 60 mm upward, 40 mm downward, 15 mm at the sides for airflow.

Current ratings and thermal derating

The derating starts at 40 °C — above that, the continuous current drops linearly. For a 25 A motor at 50 °C ambient, this unit has 4 A headroom. Minimum load is 10% of the rated current — below that the thyristor firing angle may not hold conduction. For a 32 A unit, the motor should draw at least 3.2 A at start.

Termination and wiring — spring-loaded terminals

Auxiliary and control circuits also use spring-loaded terminals, wire range 2x (24... 14 AWG). Front clamping point accepts 1x 8 AWG or 2x (16... 10 AWG) for larger conductors. Maximum motor cable length is 300 m — beyond that, capacitive charging current may cause nuisance tripping.

Control supply and bypass — what's built in

Control supply voltage is 110... 230 V DC — a single DC rail covers both 110 V and 230 V control systems without rewiring. Operating frequency is 50... 60 Hz. Integrated bypass contact system means the thyristors are shorted out after the motor reaches full speed — no external bypass contactor needed, and the heat load drops to near zero during run. No motor overload protection built in — an external overload relay (e.g., Siemens 3RU2 series) is required. No adjustable current limitation, no inside-delta circuit, no motor brake output.

Lifecycle and sourcing — current production

Lifecycle stage is current production — this is an active catalog item from Siemens, not a phase-out or NRND part. Storage temperature range -40... +80 °C per IEC 60721 class 1K6 (occasional condensation, no salt mist, sand excluded). Operating temperature -25... +60 °C.

MPN
3RW3027-2BB14