Skip to main content
Siemens 3RW4028-1BB05

Siemens 3RW4028-1BB05 SIRIUS Soft Starter, 38A, Size S0

MPN 3RW4028-1BB05
Active

Siemens SIRIUS 3RW4028-1BB05 soft starter, 38 A at 40 °C, size S0, screw and snap-on mounting, integrated bypass.

$647.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW4028-1BB05 specifications
ParameterValue
Mountingscrew and snap-on mounting
Depth155 mm
Width45 mm
Height125 mm

Product details

The Siemens 3RW4028-1BB05 is a SIRIUS soft starter, size S0, rated 38 A at 40 °C. It uses thyristors to ramp motor voltage during start, reducing inrush current and mechanical stress on the load. The integrated bypass contact system bridges the thyristors once the motor is at full speed, eliminating heat dissipation from the semiconductors during run — that's the main reason this size S0 frame can handle 38 A continuously without an external heatsink.

The 38 A rating at 40 °C is the baseline; at 50 °C it derates to 34 A, and at 60 °C to 31 A. The minimum load is 20 % of the rated current, so it won't regulate properly on a motor drawing less than about 7.6 A. Insulation voltage is rated 600 V, and the operating frequency covers 50 to 60 Hz.

The S0 footprint is 45 mm wide, 125 mm tall, 155 mm deep. Clearance: 60 mm above, 40 mm below, 15 mm to the side. With an additional fan, the mounting surface can be vertical and rotated up to ±90° or tilted ±22.5° front/back. Without a fan, keep it within ±10° rotation and ±10° tilt. Main circuit and auxiliary/control connections are screw-type terminals; the main circuit accepts 2x (0.5... 2.5 mm²) solid or stranded. Maximum motor cable length is 300 m.

Protection and control features

Built-in motor overload protection and intrinsic device protection are standard. The adjustable current limitation lets you set the start current between the minimum load and the device's rated current — useful for matching the soft starter to the actual motor FLA without changing hardware. An external reset input is provided, and a red fault signal display is on the front. The control circuit is 24 V AC/DC (both 50 and 60 Hz). No internal delta circuit or motor brake output on this variant.

MPN
3RW4028-1BB05