Skip to main content
Siemens 3SF7844-8TB04-0SS1

Siemens 3SF7844-8TB04-0SS1 Type 4 Safety Light Curtain Recei

MPN 3SF7844-8TB04-0SS1

Siemens 3SF7844-8TB04-0SS1, Type 4 safety light curtain standard receiver, 14 mm resolution, 300 mm height, 0 to 6 m range, PROFIsafe bus connection, SIMATIC FS420I series.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Product details

The Siemens 3SF7844-8TB04-0SS1 is a Type 4 safety light curtain receiver — the receiving half of a finger-protection guarding pair. Its 14 mm resolution means it catches a finger reaching into the hazard zone (finger-protection class per IEC 61496-1), and the 300 mm protected height covers a typical machine access opening. The 0 to 6 m range gives you flexibility in mounting distance from the emitter. PROFIsafe bus connection ties it directly into a SIMATIC FS420I safety CPU, so no separate safety relay is needed between the curtain and the controller — the safety signal travels over the fieldbus.

Type 4 is the highest safety integrity level for light curtains per IEC 61496 — it's designed for guarding where a failure could cause serious injury. The 14 mm resolution is the critical number: it's the smallest object the curtain can reliably detect. That's finger-protection level, not hand or body. If your application only needs hand detection (30 mm), this part is over-specified and more expensive than a Type 2 or 30 mm Type 4. The 300 mm protected height is the vertical span the receiver covers; match it to the emitter of the same height. The 0 to 6 m range is the maximum separation between emitter and receiver — fine for most machine cells, but confirm your mounting distance falls inside it.

This receiver is part of a safety light curtain system used to guard hazardous machine areas — press brakes, robotic cells, packaging lines, assembly stations. It mounts to the machine frame or guarding structure, aligned optically with the matching emitter. The PROFIsafe connection means it integrates into a Siemens safety PLC network without extra hardware. The receiver itself is the passive side; it communicates the curtain status back to the safety controller.

MPN
3SF7844-8TB04-0SS1