Skip to main content
Siemens 4EP3904-4DS00

Siemens 4EP3904-4DS00 Commutating Choke, 11A, 3mH, 600V AC,

MPN 4EP3904-4DS00

Siemens 4EP3904-4DS00 commutating choke for converters, 3-phase, 11A rated current, 3mH inductance, 600V AC, IP00, screw terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP3904-4DS00 specifications
ParameterValue
IP ratingIP00
Depth0.123 m
Width0.219 m
Height0.179 m

Product details

The Siemens 4EP3904-4DS00 is a 3-phase commutating choke (drossel) designed for converter applications. It carries a rated current of 11 A with a maximum of 12 A, an inductance of 3 mH, and an operating voltage of 600 V AC at 20 Hz. The part is rated for an ambient temperature of 40 °C and is built to thermal class B per IEC 60085. It is recognized under UL/CSA standards, making it suitable for panels destined for North American or European markets.

The 11 A rated current and 3 mH inductance are the key selection parameters: this choke limits the rate of current rise (di/dt) in the DC link of a converter, protecting the rectifier diodes and smoothing commutation notches. The 20 Hz operating frequency matches the fundamental of many variable-frequency drives running at low output; for 50/60 Hz line applications the choke will still function, but the core losses shift — verify thermal performance if used above 20 Hz. IP00 means the choke is open-frame with no enclosure protection. The screw-type terminals accept standard ring or fork lugs; strip length and torque follow the manufacturer's recommendation for the terminal size.

The choke measures 0.219 m wide by 0.179 m tall by 0.123 m deep (approximately 219 × 179 × 123 mm). It is a panel-mount component — not DIN-rail — so plan for dedicated mounting holes or a chassis plate. The screw terminals for the main circuit are sized for the 11 A continuous duty; use appropriately rated ring lugs. The total power loss is 82.2 W (53.4 W in the coil plus 28.8 W in the iron core), which must be considered in the cabinet thermal budget. Allow adequate airflow around the choke to avoid exceeding the 40 °C ambient rating.

MPN
4EP3904-4DS00