Skip to main content
Siemens 4EP4000-2DS00

Siemens 4EP4000-2DS00 Commutating Choke, 45A, 0.73mH, 500V A

MPN 4EP4000-2DS00

Siemens SENTRON 4EP4000-2DS00, commutating choke for converter, 3-phase, 45 A rated (50 A max), 0.73 mH, 500 V AC, IP00, screw terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP4000-2DS00 specifications
ParameterValue
IP ratingIP00
Depth0.143 m
Width0.219 m
Height0.179 m

Product details

The Siemens 4EP4000-2DS00 is a 3-phase commutating choke (line reactor) designed for converter front-ends, rated at 45 A continuous with a 50 A maximum and 0.73 mH inductance per the EN 61558-2-20 standard.

Three current figures govern the selection: 45 A rated (the thermal continuous current at 40 °C ambient), 50 A maximum (the short-term overload ceiling), and 61.2 A at DC — the DC rating matters if you're using this choke on the DC bus of a regenerative drive or a battery-fed inverter, where the current is unidirectional and the core saturates differently than under AC. Power loss splits into 80 W from the coil and 33 W from the iron core, totalling 113 W dissipated as heat inside the enclosure. That's not trivial for an IP00 open-frame component — it needs free air circulation or forced ventilation in a panel to keep the thermal class B (130 °C) insulation within its rated life. The IP00 protection class means no enclosure: the choke is a bare magnetic assembly with screw terminals (accepting solid or stranded conductors).

Where it goes and what it connects to

This is a panel-mount component — 219 mm wide, 179 mm tall, 143 mm deep — designed to be bolted onto a mounting plate inside a control cabinet. The screw terminals take the incoming AC line and the converter input, so it sits between the mains supply and the drive's rectifier section. Typical deployment is on a variable-frequency drive or DC drive input to reduce harmonic current injection back onto the line and to protect the converter's diodes from high di/dt during commutation.

MPN
4EP4000-2DS00