Skip to main content
Siemens 4EU2552-0EB00-4BA0

SIDAC 4EU2552-0EB00-4BA0 Output Reactor, 3-Phase, 4 kHz, 500

MPN 4EU2552-0EB00-4BA0

SIDAC output reactor, 4EU2552-0EB00-4BA0, 3-phase AC, rated switching frequency 4 kHz, 500 V, 81 A, 0.19 mH, IP00, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU2552-0EB00-4BA0 specifications
ParameterValue
IP ratingIP00
Depth0.16 m
Width0.22 m
Height0.21 m

Product details

The SIDAC 4EU2552-0EB00-4BA0 is a 3-phase AC output reactor (also called an output choke) designed to sit between a variable-frequency drive and the motor. Its job is to limit the rate of voltage rise (dV/dt) and reduce reflected-wave peaks on long cable runs — a common cause of premature motor insulation failure in PWM drive systems. The reactor is rated for a 4 kHz switching frequency, with a maximum of 8 kHz, and carries 81 A continuous at 500 V. Inductance is 0.19 mH, and the impedance voltage (UK) is 7% — a typical figure for motor-protection duty. The unit is built to thermal class H (180 °C insulation system) per IEC 60085, so it handles the heat rise from the 105.1 W coil loss and 59 W iron-core loss without derating at the rated 40 °C ambient.

The reactor is an open-frame IP00 assembly — no enclosure, no conduit knockouts. It measures 0.22 m wide by 0.21 m tall by 0.16 m deep, and the main current connections are flat-type terminals. Mounting is via the core frame directly to a backplate or sub-panel; plan for adequate clearance around the unit for airflow, since the combined heat dissipation is roughly 164 W.

MPN
4EU2552-0EB00-4BA0