Skip to main content
Siemens 4EU3921-4AA00-0A

Siemens 4EU3921-4AA00-0A Commutating Choke, 800A, 500V AC

MPN 4EU3921-4AA00-0A

Siemens 4EU3921-4AA00-0A commutating choke for converter, 3-phase, 500V AC, 800A max / 720A rated, 43 µH, IP00, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU3921-4AA00-0A specifications
ParameterValue
IP ratingIP00
Depth0.229 m
Width0.41 m
Height0.385 m

Product details

It handles a maximum continuous current of 800 A and a rated (nominal) current of 720 A, with a DC-side rating of 980.3 A. The inductance is 43 µH, producing a relative inductive voltage drop of 4 % at rated current and frequency. This choke sits between the AC line and the converter DC link to limit di/dt and reduce harmonic distortion — essential for protecting the converter's input rectifier and smoothing the DC bus.

The 800 A maximum and 720 A rated current define the thermal limit under continuous AC operation. The DC rating of 980.3 A is higher because DC current produces lower core losses — this matters if you're using the choke on the DC side of a converter. The 4 % voltage drop at rated current is the impedance figure that determines how much the choke limits inrush and fault current; a 4 % drop is typical for a commutating choke in a 500 V system. The 43 µH inductance is the actual value that governs the rate of current rise (di/dt) — critical for matching to the converter's switching frequency and gate-drive timing. The IP00 enclosure means it's open-frame, intended for installation inside a cabinet or enclosure that provides its own protection against dust and contact.

Thermal and connection details

Total power loss is 631 W — 370 W in the coil and 261 W in the iron core. Thermal class H (IEC 60085) means the insulation system can withstand 180 °C hot-spot temperature, giving generous headroom for the 40 °C ambient rating. The main circuit connects via flat-type terminals (bus-bar style), not screw clamps — expect to bolt copper bars directly. Dimensions are 0.229 m deep, 0.41 m wide, and 0.385 m high; plan cabinet space accordingly.

MPN
4EU3921-4AA00-0A