Skip to main content
Siemens 4EU4321-1DA00-0A

Siemens 4EU4321-1DA00-0A Commutating Choke, 720A, 690V, 50Hz

MPN 4EU4321-1DA00-0A

Siemens 4EU4321-1DA00-0A commutating choke for converter, 3-phase, 690V AC, 50Hz, 720A rated current, 1000A peak, 0.000048H inductance, IP00, Class H insulation, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU4321-1DA00-0A specifications
ParameterValue
IP ratingIP00
Depth0.265 m
Width0.46 m
Height0.435 m

Product details

What this choke does in a drive line

The Siemens 4EU4321-1DA00-0A is a three-phase commutating choke (Kommut.-Drossel f. Stromrichter) designed for the DC link or AC input of a converter drive. Its job is to limit the rate of rise of current (di/dt) during thyristor or IGBT commutation, reducing switching losses and suppressing harmonics that would otherwise reflect back onto the supply. Rated at 720 A continuous with a peak capability of 1 000 A, it handles the repetitive current pulses a six-pulse rectifier draws without saturating the core. That 4 % figure is the key spec for sizing: too low and commutation notches get worse; too high and the DC bus sags under load.

Thermal and mechanical constraints for panel integration

IP00 means no enclosure — the choke is a bare magnetic assembly intended for mounting inside a ventilated cabinet. The combined power loss is 760 W (460 W in the coil, 300 W in the iron core), so forced-air cooling or a generously sized enclosure with natural convection is required. Class H insulation (180 °C thermal class per IEC 60085) gives a 40 °C ambient rating with headroom for hot-spot rise; derate the continuous current if the cabinet ambient exceeds that. The footprint is 0.46 m wide × 0.435 m tall × 0.265 m deep — a substantial panel-mounted component. Terminals are flat-type connectors for bolted bus-bar or cable-lug connections; plan for access on both sides. No DIN-rail clip — this is a through-bolt or bracket mount.

MPN
4EU4321-1DA00-0A