Skip to main content
Siemens 5SU1354-6KK20

Siemens 5SU1354-6KK20 SENTRON RCBO, B-Curve 20 A, 10 kA

MPN 5SU1354-6KK20
Active

Siemens SENTRON 5SU1354-6KK20 RCBO, 1P+N, B-curve, 20 A (30 °C), 10 kA per EN 60898, 2 MW, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SU1354-6KK20 specifications
ParameterValue
Poles2
Depth77 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

It protects a single-phase final subcircuit: one pole switched, neutral switched but not protected.

Rated 20 A at 30 °C ambient, this RCBO derates linearly as the panel temperature climbs: 18.8 A at 40 °C, 17.4 A at 50 °C, 15.4 A at 65 °C, and 14.6 A at 70 °C. If your distribution board sits in a hot mechanical room or next to a furnace, the 30 °C figure is not the one you spec against — use the 50 °C or 65 °C column. The breaking capacity is 10 kA per EN 60898 (the standard for household-type MCBs) and 20 kA per IEC 60947-2 (the industrial standard) — so it handles fault currents up to 20 kA in an industrial panel where the prospective short-circuit current is higher. The unit is halogen-free and silicon-free — relevant for semiconductor fabs, clean rooms, or any environment where outgassing from a fault event must not corrode nearby contacts or optics.

Two modular-width units (36 mm) snap onto standard DIN rail. Depth is 77 mm, installation depth 70 mm — check your enclosure depth before committing the BOM; a shallow 80 mm enclosure leaves only 3 mm clearance behind the device. Rated IP20 with conductors connected and distribution board installed — this is a panel-internal device, not for standalone outdoor use without an enclosure.

MPN
5SU1354-6KK20