Skip to main content
Siemens 5SU1656-0KK06

Siemens 5SU1656-0KK06 SENTRON RCBO, 2-pole 6A B-curve 30mA

MPN 5SU1656-0KK06

Siemens SENTRON RCBO, 2-pole 1P+N, 6 A rated, B-curve, AC residual current type, 30 mA sensitivity, 6 kA breaking capacity per EN 60898, 25 kA per IEC 60947-2, 2 MW wide, IP20, current production.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SU1656-0KK06 specifications
ParameterValue
Poles2
Depth77 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

The Siemens 5SU1656-0KK06 is a SENTRON RCBO — a combined residual-current and overcurrent protective device — in a 2-pole 1P+N configuration. It switches the line conductor only, with the neutral passing through the residual-current transformer but not switched. Rated 6 A at 30 °C with a clear thermal derating curve: 5.7 A at 40 °C, 5.4 A at 50 °C, 5.1 A at 60 °C, and 4.62 A at 70 °C. For a panel running at 50 °C ambient, the usable current is 5.4 A — not 6 A. The higher 25 kA figure applies when the device is certified under the industrial standard, giving headroom for high-fault locations like substation secondaries. Mounting position is any orientation. Supply can enter from top or bottom — no mandated orientation. The IP20 rating applies only when the distribution board is installed with connected conductors; the device itself is not sealed against dust ingress without the enclosure.

The degree of pollution is 2 (non-conductive pollution that becomes conductive only when condensation occurs), typical for standard indoor distribution boards.

Two modular-width units (36 mm) means it occupies the same slot pitch as two single-pole MCBs. The test button requires a minimum 100 V to operate the test circuit — verify the phase-to-neutral voltage exceeds this before relying on the built-in test function during commissioning. The product designation per IEC 81346-2 is F (protective device).

MPN
5SU1656-0KK06