Skip to main content
Siemens 6AG1232-4HB30-2XB0

Siemens 6AG1232-4HB30-2XB0 SIPLUS SM 1232 Analog Output

MPN 6AG1232-4HB30-2XB0

Siemens SIPLUS S7-1200 SM 1232 analog output module, 6AG1232-4HB30-2XB0, 2 channels, voltage or current, 14-bit / 13-bit resolution, conformal coating, -25 to +70 °C, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6AG1232-4HB30-2XB0 specifications
ParameterValue
IP ratingIP20
Temp operating max55 °C
Temp operating min25 °C
Depth75 mm
Width45 mm
Height100 mm

Product details

What this SIPLUS module is — and why the coating matters

The 6AG1232-4HB30-2XB0 is a SIPLUS variant of the standard S7-1200 SM 1232 2AQ analog output module (base order 6ES7232-4HB30-0XB0) with conformal coating and an extended temperature range of -25 °C to +70 °C. That coating is the differentiator: it protects the PCB against condensation, corrosive gases, and dust ingress in environments where a standard uncoated module would fail — think cold-chain refrigeration, outdoor cabinets, or food-processing washdown zones where the panel isn't sealed. The module provides two analog outputs configurable individually as voltage (±10 V, 14-bit resolution) or current (0–20 mA, 13-bit resolution). The 14-bit voltage path gives 0.3 % accuracy relative to the output range, and the current output can drive loads up to 600 Ω. That's enough headroom to feed a remote VFD analog input or a chart recorder without a signal conditioner.

Temperature range and environmental tolerance

Rated for -40 °C storage and -25 °C to +70 °C operation, the module also carries altitude derating: full spec at 0–2000 m, then a 10 K temperature reduction from 2000–3500 m, and a 20 K reduction from 3500–5000 m. If your panel sits at a high-altitude installation, budget the ambient temperature inside the enclosure accordingly. The module draws 45 mA from the 24 V DC supply plus 80 mA from the 5 V backplane bus, for a typical power loss of 1.5 W. That's low enough that multiple modules can sit adjacent without forced cooling in a standard IP20 cabinet.

Diagnostics and monitoring

Built-in diagnostics cover wire-break detection on current outputs, short-circuit monitoring, supply voltage supervision, and diagnostic alarms. The module reports the status of each output channel and triggers an alarm on fault — useful for a maintenance team that needs to know which loop dropped before the line stops.

MPN
6AG1232-4HB30-2XB0