Skip to main content
Siemens 6EP1437-2BA20

SITOP 6EP1437-2BA20 Power Supply, 24 V DC 20 A, UL Listed

MPN 6EP1437-2BA20
Active

Siemens SITOP modular, 6EP1437-2BA20, 24 V DC / 20 A power supply, 400-500 V AC input, 91.5% efficiency, DIN rail mount, UL/CSA listed.

$267.97 – $480.76 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP1437-2BA20 specifications
ParameterValue
Voltage24 V
Power960 W
Frequency47 ... 63 Hz
Phases3-phase
IP ratingIP20
MountingSnaps onto DIN rail EN 60715 35x15
Depth150 mm
Width145 mm
Height145 mm
Efficiency91.5%

Product details

Integrator Note

The Siemens SITOP modular 6EP1437-2BA20 is a 24 V DC power supply rated for a continuous 20 A output — actually the 14 A maximum on the spec line is the per-terminal limit; the unit delivers 20 A continuously through the dual output terminals. Input range is 400–500 V AC three-phase, 47–63 Hz. Efficiency sits at 91.5 % at full load. Mounts on DIN rail EN 60715 35x15. The output is safety extra-low voltage (SELV) per EN 60950-1 and EN 50178, so it can feed control circuits without additional isolation.

Clearance and Cooling

Top and bottom clearance required: 40 mm each. Left and right sides: 0 mm — units can be mounted side-by-side without spacing. Above +45 °C, output current must be derated: 48 A up to +45 °C, then 3 % per K from +60 to +70 °C. Storage and transport range is -40 to +85 °C.

Protection and Approvals

IP20 protection. UL/cULus listed under UL 508 and CSA C22.2 No. 107.1 (File E197259). Also cCSAus to CSA C22.2 No. 60950-1 and UL 60950-1. CE marked, EAC approved. Not ATEX, IECEx, FM, or UL hazloc rated. Galvanic isolation provides SELV output. The feeder requires a 3-pole C-characteristic MCB rated 10–16 A, or a Siemens 3RV2011-1DA10 (set to 3 A) or 3RV2711-1DD10 (UL 489 listed).

MPN
6EP1437-2BA20