Skip to main content
Siemens 6EP3321-7SB00-0AX0

Siemens 6EP3321-7SB00-0AX0 SITOP PSU8200, 24V 2.8A, DIN Rail

MPN 6EP3321-7SB00-0AX0
Active

Siemens SITOP PSU8200, 6EP3321-7SB00-0AX0, 24 V DC / 2.8 A switched-mode power supply, 120-240 V AC input, DIN rail mount, IP20, SELV output.

$59.69 – $150.04 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP3321-7SB00-0AX0 specifications
ParameterValue
Fuse protection type3.15 A
Voltage12 V
Power24 W
Frequency47 ... 63 Hz
Phases1-phase
IP ratingIP20
MountingSnaps onto DIN rail EN 60715 35x7.5/15
Depth88 mm
Width25 mm
Height100 mm
Efficiency83.3%
I/O channels1

Product details

The Siemens 6EP3321-7SB00-0AX0 is a SITOP PSU8200 series switched-mode power supply delivering a rated 24 V DC at 2.8 A typical output, with a DC input range of 110–275 V and AC input 120–240 V at 47–63 Hz. It snaps onto a standard DIN rail EN 60715 35×7.5/15, making it a drop-in replacement in most control cabinets. The output is safety extra-low voltage (SELV) per EN 60950-1, which simplifies panel wiring for control circuits and reduces isolation requirements downstream.

This unit carries cULus listing under UL 508 and CSA C22.2 No. 107.1 (File E197259), plus cCSAus to CSA C22.2 No. 60950-1 and UL 60950-1. CE marking and EAC approval are confirmed. It is also rated NEC Class 2 per UL 60950-1/UL 1310, which matters for installations where the power-limited circuit classification avoids conduit requirements for the load side. No ATEX, IECEx, or UL hazloc approval — this unit is for general-purpose industrial environments, not explosive atmospheres.

Mounts by snapping onto DIN rail EN 60715 35×7.5/15. Required free space above and below the unit is 50 mm each; no clearance needed on the left or right sides. This 50 mm vertical clearance is for natural convection cooling — the unit is rated for operation at -25 to +70 °C with natural convection. If you stack units or enclose them tightly, derate or add forced air. The housing is IP20, so it's suitable for clean indoor panels only.

Feeder Protection and Wiring

The input requires a circuit breaker sized between 4 A characteristic C and 16 A characteristic C, or 6 A characteristic B to 16 A characteristic C, or a specific Siemens 3RV2011-1EA10 (set to 4 A) or 3RV2711-1ED10 (UL 489). Input terminals (/+, L2/N/-, PE) accept 0.5–2.5 mm² single-core or finely stranded wire via PushIn connectors; output terminals (+1, -1, -2) use the same PushIn style for 0.5–2.5 mm². Integral fuse protection is rated at 3.15 A.

MPN
6EP3321-7SB00-0AX0