Skip to main content
Siemens 6ES7133-0BH01-0XB0

Siemens 6ES7133-0BH01-0XB0 ET 200S Digital I/O, 8DI/8DO, 2A

MPN 6ES7133-0BH01-0XB0

Siemens SIMATIC ET 200S electronic module, 8 DI + 8 DO, 24 V DC, 2 A output current, 12 Mbit/s, I²t 0.05 A²·s.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7133-0BH01-0XB0 specifications
ParameterValue
Depth60 mm; EB and TB
Width160 mm; EB and TB
Height130 mm; EB and TB

Product details

Module identity and key figures

The Siemens 6ES7133-0BH01-0XB0 is an ET 200S digital I/O module combining 8 inputs and 8 outputs on a single unit, rated for 24 V DC control and carrying an I²t specification of 0.05 A²·s with starting current inrush — a detail that supports fuse coordination on the output side. The backplane communication runs at up to 12 Mbit/s, and the module includes RUN and bus fault (BF) LEDs, plus SYNC and FREEZE capabilities for deterministic update schemes.

Rating meaning and installation constraints

Output currents are derated by installation orientation: the module delivers a maximum of 2 A per output when mounted horizontally up to 60 °C; that limit drops for vertical or other positions, so plan air flow accordingly. The I²t figure (0.05 A²·s) is useful when designing output-circuit protection — it gives a guideline for the let-through energy the semiconductors can withstand during short-duration inrush events. Input thresholds follow standard 24 V logic: signal "0" spans -30 to +5 V, signal "1" spans 13 to 30 V, with a typical sink current of 4 mA at rated voltage. Maximum cable length for unshielded wiring is 100 m, and the module supports 2-wire proximity sensors directly.

MPN
6ES7133-0BH01-0XB0