Skip to main content
Siemens 6ES7141-1BF30-0XB0

Siemens 6ES7141-1BF30-0XB0 EM141 8DI 24V DC, Spare Part

MPN 6ES7141-1BF30-0XB0

Siemens ET 200X extended module EM141, 6ES7141-1BF30-0XB0, 8 digital inputs 24 V DC, 5-pole M12, channel diagnostics, spare part.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7141-1BF30-0XB0 specifications
ParameterValue
Depth55 mm
Width87 mm; Width module 60 mm
Height110 mm
I/O channels4

Product details

Spare part for ET 200X — what it covers

The Siemens 6ES7141-1BF30-0XB0 is an extended module EM141 for the ET 200X distributed I/O family, carrying 8 digital inputs at 24 V DC with 5-pole M12 connectors. The description flags it as a spare part, so this is the replacement unit for an existing field installation, not a new-design pick.

Input voltage range and signal thresholds

Signal '0' is recognised between -3 and +5 V; signal '1' between 13 and 30 V. That 13 V threshold is typical for 24 V DC sensor inputs — it gives noise margin below the nominal 24 V rail. The module also accepts 2-wire sensors, with a permissible quiescent current up to 1.5 mA.

Diagnostics and interrupt handling

Channel-by-channel wire-break and short-circuit detection are standard, with a red channel fault LED per input. A parameterisable diagnostic alarm and hardware interrupt feed the PLC — useful for catching a broken sensor lead on a conveyor line before the cycle faults out. The input delay is selectable at 0.5, 3, 15, or 20 ms, matching the response to the sensor type and process speed.

Power draw and isolation

Typical power loss is 1.5 W from the backplane bus, with a max draw of 30 mA at 5 V DC. Isolation between circuits is tested at 500 V DC, and between different circuits at 75 V DC / 60 V AC. There is no potential separation between the digital inputs themselves — adjacent channels share a common reference.

Sourcing reality — spare part channel

This is a current-production spare part according to Siemens lifecycle data. No direct stock-holding claim; the lead time depends on the quantity and the channel at that moment.

MPN
6ES7141-1BF30-0XB0