Skip to main content
Siemens 6ES7488-3AA00-0AB1

6ES7488-3AA00-0AB1 Siemens CPU488-3 Central Module, Mature L

MPN 6ES7488-3AA00-0AB1

Siemens S7-400 CPU488-3, 6ES7488-3AA00-0AB1, central processing unit (Zentralbaugruppe/DOS), mature lifecycle stage.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Product details

The Siemens 6ES7488-3AA00-0AB1 is a CPU488-3 central processing unit — a Zentralbaugruppe running under DOS — for the S7-400 rack. It is the brains of a medium-to-large control chassis, handling program execution, I/O scanning, and backplane communication. This is the DOS-based variant, so it boots into a real-time DOS environment rather than a proprietary RTOS, which matters if your legacy application relies on DOS-level interrupt handling or third-party DOS software stacks.

The CPU488-3 snaps into the S7-400 rack (standard 19-inch or DIN-rail-mounted UR/CR chassis). It occupies one slot and connects to the backplane via the P-bus and K-bus. The DOS environment means the boot firmware loads from onboard flash; no separate memory card is required for the OS kernel, though user program and data are stored on a memory card (Siemens MMC or RAM card, depending on revision). The front panel carries the mode selector (RUN/STOP/MRES), a status LED row, and the MPI/DP interface for programming. Wires up clean if you keep the programming cable on the front and route the backplane ribbon neatly behind.

MPN
6ES7488-3AA00-0AB1