Skip to main content
Siemens 6ES7531-7NF10-0AB0

Siemens 6ES7531-7NF10-0AB0 AI module, MSI 0-20 mA / 1-5 V

MPN 6ES7531-7NF10-0AB0
Active

Siemens SIMATIC S7-1500 analog input module, 6ES7531-7NF10-0AB0, MSI-capable, 0 to 20 mA and 1 V to 5 V ranges, 35 mm wide.

$891.27 – $1,731.92 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7531-7NF10-0AB0 specifications
ParameterValue
Adjustment of measuring rangeNo
Depth129 mm
Width35 mm
Height147 mm

Product details

What the module does on the rack

The Siemens 6ES7531-7NF10-0AB0 is an analog input module for the SIMATIC S7-1500 I/O family, occupying a single 35 mm slot on the standard S7-1500 mounting rail and reading back to the CPU over the backplane bus. The module is built around MSI (Measuring Signal Isolated) capability rather than thermocouple or RTD inputs, so its job on the panel is millivolt and milliamp signal acquisition, not direct thermocouple cold-junction compensation.

Signal ranges and resolution behavior

MSI is supported, and the listed signal ranges are 0 to 20 mA together with 1 V to 5 V, which is the standard set for 4-wire mA and ratiometric voltage pickup off field transmitters. Step detection is listed in both low and high direction, so the module can flag a defined excursion band on the analog input without burning CPU scan time on a custom comparator. Voltage ranges 0 to +5 V and 0 to +10 V are not listed, and the standard 0 to 10 V industrial span is therefore not directly covered by this module, which is the first thing an integrator specifies against.

Sensor classes NOT carried by this module

Thermocouple types B, C, E, J, K, L, N, R, S, and T are all listed as No, confirming the module is scoped to MSI/mV-class acquisition rather than direct thermocouple linearization; thermocouple points on the I/O list route to a TC-capable AI module instead.

Diagnostics and asset data on the front panel

Front-panel status is a green RUN LED and a red ERROR LED, which is the minimum panel-builder needs for first-pass fault isolation before opening TIA Portal. I&M data is supported from I&M0 through I&M3, so the module carries plant-level identification, installation, and descriptor fields that survive a CPU-to-CPU migration and a hot-swap of the module itself.

MPN
6ES7531-7NF10-0AB0