Skip to main content
Siemens 6SL3211-0KB13-7UA0

Siemens 6SL3211-0KB13-7UA0 SINAMICS G110 Drive, 0.37 kW, 1AC

MPN 6SL3211-0KB13-7UA0

Siemens SINAMICS G110 - CPM110 AC-DRIVE, WITHOUT FILTER, 1AC200-240V +10/-10% 47-63HZ, ANALOG INPUT, CT: 0,37KW VT: 0,37KW, CT-OVERLOAD: 150% 60S, 150 X 90 X 101 (HXWXD), IP20 without heatsink, AMBIENT TEMP -10 TO +50 DEG C WITHOUT BOP.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Product details

The Siemens 6SL3211-0KB13-7UA0 is a SINAMICS G110 CPM110 AC drive, sized for a 0.37 kW motor on single-phase 200-240 VAC input. It delivers constant-torque (CT) and variable-torque (VT) ratings at the same 0.37 kW, with a CT overload capability of 150% for 60 seconds — enough to handle short-duration load spikes on a conveyor or small pump without oversizing the drive. The drive is unfiltered (no internal EMC filter), rated IP20, and designed without a heatsink, which means it dissipates heat through the chassis into the enclosure air. Ambient operating range is -10 to +50 °C; plan for forced ventilation or derating if the panel runs near the upper end. The 150 x 90 x 101 mm (HxWxD) footprint fits a standard backplate, but the lack of a heatsink means you rely on cabinet airflow — don't stack it tight against other heat sources.

Mounting this drive in a panel: IP20 means it is suitable for clean, dry indoor enclosures only — no washdown, no dust. The absence of a heatsink saves width on the DIN rail but shifts the thermal load to the cabinet; a 0.37 kW drive at full load dissipates roughly 15-20 W (typical for this class), so a small panel fan or natural convection with generous venting is adequate. Wire the single-phase input (L, N, PE) and motor output (U, V, W) with 1.5 mm² stranded for the power circuit; the analog input accepts a 0-10 V or 0/4-20 mA speed reference signal.

MPN
6SL3211-0KB13-7UA0