Skip to main content
Siemens 6SL5120-1UE32-0AD0

6SL5120-1UE32-0AD0 Siemens SINAMICS S220 Servo Drive, 110 kW

MPN 6SL5120-1UE32-0AD0
Active

Siemens SINAMICS S220 Single Motor Module, booksize D, order code 6SL5120-1UE32-0AD0, 495-720 V DC input, 250 A DC link, 0-480 V 3AC 200 A output, rated 110 kW, IP20, internal air cooling.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6SL5120-1UE32-0AD0 specifications
ParameterValue
SeriesSingle Motor Modules in booksize format

Product details

What the 110 kW rating means for motor sizing

The 6SL5120-1UE32-0AD0: The 110 kW rated power and 200 A three-phase output drive standard AC servo motors in the medium-to-high power band — a machine builder specifying a new axis or replacing a failed module on an existing line will match this directly against the motor nameplate current, not the DC bus rating. The 495-720 V DC input range reflects the typical DC-bus voltage swing across a rectified 400/480 V mains supply under regenerative braking — when the bus caps charge toward the upper limit the module draws 250 A from the DC link, so the upstream common bus or supply module must be rated to deliver that without voltage collapse.

Booksize D format and the IP20 constraint

The booksize D mechanical form factor slots into a SINAMICS S220 drive cabinet — the 400 × 580 × 320 mm envelope tells you it needs a dedicated enclosure bay with internal air cooling only, meaning no liquid cooling loop and no sealed/washdown housing. IP20 means it is rated for an internal control-cabinet environment only — dust and touch protection, no outdoor or washdown deployment without a separate enclosure rated to the site conditions.

Firmware prerequisite and commissioning impact

The module ships from FW V5.2 SP3 HF10 — if the existing line's drive stack is running an earlier firmware revision, the S220 module will either flag a compatibility alarm or simply not enumerate on the drive bus until the firmware is updated through the SINAMICS Startdrive commissioning tool. Confirm the existing control unit firmware before drop-in replacement; a mismatch here stops commissioning even when the hardware is sound.

Export control and compliance for cross-border procurement

Export control classification is AL:N / ECCN 3A999A — this is an unrestricted commercial servo module under US ECCN rules, but the AL:N German origin flag triggers dual-use review for certain end-user destinations. Check your import country's ECCN acceptance and whether a Siemens export declaration is required for the order quantity being quoted.

MPN
6SL5120-1UE32-0AD0