Skip to main content
Mitsubishi Electric AJ65VBTCE2-8T

Mitsubishi AJ65VBTCE2-8T CC-Link Remote I/O, 8 Transistor Ou

MPN AJ65VBTCE2-8T

Mitsubishi AJ65VBTCE2-8T, CC-Link remote I/O station, 8 transistor outputs (sink type), rated load voltage DC 12/24 V, 0.1 A per point, 1 ms response time.

$266.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

AJ65VBTCE2-8T specifications
ParameterValue
Station typeO station, Remote I
Current35 mA or less (24 VDC, all points ON)
Installation locationIn the control panel
Temp storage max75 °C
Temp storage min-20 °C
Temp operating max55 °C
Temp operating min0 °C
Pollution degree2 or less
Depth43.5 mm
Width40 mm
Output formatTransistor output (sink type)
Output common method8 points / common (Sensor connector (e - CON) type 2 wire type)
Output isolation methodPhotocoupler isolation

Product details

Integrator note — output loading and protection

The AJ65VBTCE2-8T is a CC-Link remote I/O station with eight transistor sink outputs, each rated 0.1 A continuous and a common limit of 0.8 A shared across the eight points. The unit power supply accepts DC 20.4 to 26.4 V, while the load supply range spans DC 10.2 to 26.4 V — so a single 24 VDC bus can feed both if the rail stays within the tighter unit supply window. Outputs are photocoupler-isolated from the backplane, with a Zener diode surge suppressor across each channel. Response time is 1 ms or less for both ON and OFF transitions under resistive load, which suits valve banks or indicator lamp arrays that need consistent timing. The built-in overload, overvoltage, and overheat protection functions trip before the output transistor fails — good for a line that cannot tolerate a welded-on output.

CC-Link integration and wiring

This unit occupies one station on a CC-Link Ver.1.10 network. Communication uses the dedicated cable (FANC-110SBH or similar) with one-touch connectors sold separately. Unit power and I/O power connect via a separate one-touch connector; the output field wiring uses sensor connectors (e-CON, 2-wire type), commoned in groups of eight.

MPN
AJ65VBTCE2-8T