Skip to main content
Omron E2AS08KS01WPB1TP5MOMS

Omron E2AS08KS01WPB1TP5MOMS Inductive Sensor, M8 Flush, 1mm,

MPN E2AS08KS01WPB1TP5MOMS

Omron E2A series inductive proximity sensor, M8 flush mount, NO output, 1 mm sensing distance, 10-32 VDC, 200 mA, IP67/IP69K, stainless steel housing, 3-pin stranded wire.

$99.60 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E2AS08KS01WPB1TP5MOMS specifications
ParameterValue
SeriesE2 A
Current10 mA
IP ratingIP67 / IP69K
MountingFlush Mount
Width13 mm
Height13 mm
Housing materialStainless Steel
Length40 mm
Construction formM8

Product details

Fit and function

The Omron E2AS08KS01WPB1TP5MOMS is a flush-mount M8 inductive proximity sensor with a 1 mm sensing distance, normally-open output, and a 200 mA load rating over 10–32 VDC. The 1 mm range is intentionally tight—it suits applications where you detect small ferrous targets at a fixed gap, such as position confirmation on a pick-and-place gripper or a cam-lobe presence check, without false triggers from adjacent metal.

Rugged enough for washdown

The stainless steel housing and IP67/IP69K rating let this sensor survive high-pressure, high-temp washdown cycles typical in food processing or pharmaceutical filling lines. The 10 % repeat accuracy on a 1 mm sensing distance keeps the switch point consistent over temperature.

How it sits beside the 2 mm sibling

The electrical envelope—10–32 VDC, 200 mA, NO output—is shared with the 2 mm sensing distance variant E2AS08KS02WPD12MOMS, and the M8 flush-mount body is identical. The critical difference for a panel already wired for the 2 mm three-pin version is that this unit comes with stranded 3-pin wiring, while the 2 mm peer uses a 2-pin termination. If your existing harness expects two wires (brown and blue only, signal and power on the same pair), replacing with this 3-pin NO sensor will require a third wire for the normally-open signal return. Same footprint, different wiring scheme.

MPN
E2AS08KS01WPB1TP5MOMS