BOM / RFQ

ABB 1SFA898214R7000 PSTX300 Soft Starter, 208-690V AC, Multi

MPN1SFA898214R7000

Active

ABB PSTX300 series soft starter, 1SFA898214R7000, auto phase sequence detection, 208...690 V AC, 50/60 Hz, 1...120 s ramp, multi-protocol fieldbus.

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

1SFA898214R7000 key specifications
Parameter	Value
Terminal type	Main Circuit: Bars
Product main type	PSTX300
Voltage	208 ... 690 V AC
Initial voltage during start	10 ... 99 %
Step down voltage special ramp	100 ... 10 %
Rated control supply voltage	100 ... 250 V AC
Rated control circuit voltage	24 V DC
Technical UL (CSA, maximum operating voltage UL, CSA)	Main Circuit 690 V
Current limit function	1.5 ... 7.5 xle
Starting capacity at maximum rated current ie	4xIe for 10s
Rated operational current - In-Line connection	300 A
Rated operational current - inside delta connection	515 A

All specifications

1SFA898214R7000 additional specifications
Parameter	Value
Technical UL (CSA, horsepower rating UL, CSA)	(200 ... 208 V AC) Three Phase 100 Hp
Rated operational power - In-Line connection	(230 V) 90 kW
Rated operational power - inside delta connection	at 230 V 160 kW
Rated frequency	50/60 Hz
IP rating	acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00
Protocol	Modbus-RTU; Modbus-TCP; Ethernet-IP; EtherCAT; DeviceNet; CANopen; Profibus; Profinet; BACnet-IP; BACnet-MSTP
Switch for inside delta connection	Yes
Popular downloads (CAD dimensional drawing)	2CDC001079B0201
Material compliance (Toxic substances control act - TSCA)	2CMT2023-006524
Material compliance (Conflict minerals reporting template)	9AKK108467A5658
Technical UL (CSA, tightening torque UL, CSA)	Main Circuit 221.3
Function	Auto phase sequence detection
Ramp time	1 ... 120 second [unit of time]
Analog outputs	0...10 V, 0...20 mA, 4...20 mA
Warning details	Current imbalance warning; Current underload warning; Electronic overload Time-to-trip; EOL warning; Faulty fan warning; Locked rotor warning; Motor runtime limit warning; Over voltage warning; Phase loss warning (for standby); Power factor underload warning; Short circuit warning (for Limp mode); THD(U) - Total Harmonic Distortion warning; Thyristor overload warning (SCR); Under voltage warning; Voltage imbalance warning
Run signal relay	Yes
Tightening torque	Main Circuit 25 N·m
Fault signal relay	Yes
Overload protection	Built-in electronic overload protection
Protection function	Bypass open protection; Current imbalance protection; Current underload protection; Dual overload (separate overload for start and run); Earth fault protection / ground fault protection; Electronic overload protection, EOL; Extension IO failure protection; Fieldbus failure protection; HMI failure protection; Locked rotor protection; Max number of starts/hour; Over voltage protection; Phase reversal protection; Power factor underload protection; PT-100 connection; PTC connection; Too long current limit protection; Too long start time protection; Under voltage protection; User defined protection; Voltage imbalance protection
By-pass signal relay	Yes
Overload signal relay	Yes
Ambient air temperature	Operation -25 ... +60 °C
Service factor percentage	100 %
Object classification code	Q
Popular downloads (EPLAN data)	9AAC181170_EPLAN
Signal indication fault	Red
Integrated electronic overload	Yes
Connecting capacity main circuit	Hole Diameter 8.5 mm
Signal indication running r	Green
Connecting capacity supply circuit	Rigid 1 x 2.5
IDEA granular category code	4740 >> Soft starter
Signal indication protection	Yellow
Connecting capacity control circuit	Rigid 1 x 2.5 mm²
Popular downloads (Instructions and manuals)	1SFC132428M0201
Popular downloads (Data sheet, technical information)	1SFC132012C0201
Popular Downloads/Instructions and manuals (Part 2)	1SFC132081M0201
Popular Downloads/Instructions and manuals (Part 3)	1SFC132060M0201

Product details

The ABB 1SFA898214R7000 is a PSTX300-series soft starter with auto phase sequence detection, sized for three-phase induction motors on 208...690 V AC supplies at 50/60 Hz. Its 1...120 second ramp time lets you match acceleration to load inertia — pump soft-fill or conveyor start without mechanical shock. Built-in electronic overload protection covers the motor directly, eliminating the separate overload relay from the BOM. The control supply accepts 100...250 V AC; the control circuit runs on 24 V DC, keeping the logic side isolated from the power side.

Fieldbus and I/O

Communication options cover Modbus-RTU, Modbus-TCP, Ethernet/IP, EtherCAT, DeviceNet, CANopen, Profibus, Profinet, BACnet-IP, and BACnet-MSTP — one part number supports all protocols, so you can drop it into a Rockwell, Siemens, or B&R line without swapping hardware. Analog outputs are field-configurable as 0...10 V, 0...20 mA, or 4...20 mA for feeding motor current or ramp status to a PLC analog card.

Protection depth

Protection functions include phase reversal, current imbalance, locked rotor, earth fault, under/over voltage, PTC/PT-100 motor thermal input, and user-defined limits. The warning set covers current imbalance, underload, power factor underload, THD(U), fan failure, and EOL — useful for predictive maintenance on critical pumps or conveyors where unplanned downtime costs line time.

Frequently asked questions

Where can I buy 1SFA898214R7000 and get a price?

This part is sourced and quoted to order against an RFQ through independent distribution. Current pricing and availability are confirmed at quote time — submit an RFQ for a firm quote.

What is the ramp time range on 1SFA898214R7000?

The ramp time is adjustable from 1 to 120 seconds, letting you match the acceleration profile to the load — short for low-inertia conveyors, longer for pumps or fans to avoid pressure surges.

What compliance documentation does ABB provide for 1SFA898214R7000?

RoHS compliance follows EU Directive 2011/65/EU and Amendment 2015/863. WEEE category is 5 (Small Equipment). The part is classified B2B. CAD dimensional drawing 2CDC001079B0201 and EPLAN data 9AAC181170 are available.