Relay specs for a panel spare
The ABB 1SVR405611R2100 is a CR-M series general purpose relay with a DPDT contact arrangement, rated 12 A at 250 V, and a 120 VAC coil. It mounts into an 8-blade socket — that's the same footprint as other CR-M interface relays, so it swaps in without rewiring the base.
What the 12 A rating means on the line
12 A at 250 V is the continuous resistive load rating — for motor or inductive loads you'd typically derate to 1/3 or 1/2 of that, depending on the inrush. The DPDT form gives you two independent switching paths, handy for interlocking a control signal and a status feedback on the same coil. The 8-blade base is the standard CR-M interface relay socket pattern — it's the same layout used across the CR-M range, so if you're standardising on that family, this relay drops into the same installed base without a panel rework.
No stock-holding claim here; quoted per order.