The ABB 1TNE968902R2102 is the DI562 distributed-automation digital input module — 16 DI sink channels on a pluggable connector, listed under the Distributed Automation I/Os product name.
Input ratings and what they govern
Inputs are typed AC/DC with a maximum input voltage range of 0...30 V and a per-channel input current of 5 mA. The input filter runs at a delay time (τ) of 8 ms, which is what kills contact bounce and short PLC scan pulses; budget for that latency on any high-speed counting or latch input where 8 ms would mask the event you are trying to capture. The 16 digital inputs are fixed-purpose and not configurable as outputs (0 configurable I/Os), so this slice is dedicated to sensing — pair it with a DO module if the application also needs actuator drive.
Mechanical and environmental envelope
Connection is pluggable, which keeps field re-wiring on a replacement card down to pulling the terminal block rather than the whole module. Degree of protection is IP20 with an operating ambient air temperature range of 0...+60 °C — a cabinet-mounted, indoor / control-room envelope, not a panel face that will see washdown or hose-directed water. WEEE Category 5 classifies it as small equipment with no external dimension over 50 cm and the WEEE registration is Business To Business, so end-of-life routing goes through the OEM's B2B take-back rather than retail recycling.
Compliance paperwork
RoHS compliance is documented against EU Directive 2011/65/EU and Amendment 2015/863 of July 22, 2019, and REACH information is on file with a declaration date of 2024-12-06; the part is flagged as containing substances above 0.1 mass percentage, which is the REACH SCIP entry the OEM must publish into the supply chain.