Skip to main content
ABB 2CDS271006R0165

ABB 2CDS271006R0165 MCB, B-Curve, 16 A, 1-Pole, 10 kA

MPN 2CDS271006R0165

ABB System pro M compact S200 series, miniature circuit breaker, B-curve, 16 A, 1-pole, 440 V, 10 kA Icn, 15 kA Icu, DIN rail mount, screw terminals, IP20/IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

2CDS271006R0165 specifications
ParameterValue
Insulation voltage ui440 V
Current16 A
Poles1
IP ratingIP20 / IP40
MountingDIN Rail
Depth69 mm
Width17.5 mm
Height88 mm

Product details

The ABB 2CDS271006R0165 is a 1-pole miniature circuit breaker from the System pro M compact S200 series, rated 16 A with B-curve tripping characteristics. It fits a standard 17.5 mm DIN-rail slot — one module wide — and is sized for lighting, socket-outlet, and general-purpose protection in residential and light commercial distribution boards.

Breaking capacity and coordination

Rated short-circuit breaking capacity Icn is 10 kA per EN 60898, which is the standard for household and similar installations. The ultimate breaking capacity Icu is 15 kA per IEC 60947-2, covering industrial panel applications where the prospective fault current may be higher. For most distribution boards fed from a 100–200 kVA transformer, 10 kA is sufficient; the 15 kA Icu gives headroom for closer-coupled sub-distribution or higher-fault installations. Overvoltage category III means the MCB is rated for fixed installation downstream of the main distribution board — permanent connection, not plug-in. Rated insulation voltage 440 V covers 230/400 V three-phase systems with margin.

Mounting and enclosure fit

DIN-rail mount on a standard 35 mm top-hat rail. Width 17.5 mm, height 88 mm, depth 69 mm — one module, so it occupies a single 18 mm pitch in a distribution board. IP20 at the front terminals, IP40 for the enclosure body: suitable for dry indoor panels, not for washdown or outdoor exposure. Screw terminals accept up to 2.8 Nm tightening torque — typical for 2.5–4 mm² conductors.

MPN
2CDS271006R0165