The ABB 2TLA020056R1400 is a 20-meter cable assembly terminated with a straight 5-pole M12 female molded connector on one end, using 22 AWG conductors and an overall braid shield inside a black PVC jacket. This is a single-ended cable — the field end is unterminated, ready for your gland or junction box.
The 5-pole M12 female connector mates with standard M12 male ports on sensors, actuators, or I/O blocks. The 22 AWG conductors carry signal-level currents typical of 24 VDC discrete or analog loops — adequate for a 4-20 mA transmitter or a proximity sensor, but undersized for a solenoid valve pulling 1 A or more. The overall braid shield handles common-mode EMI on long cable runs in inverter-dense panels; terminate the shield at the panel end only. The 20-meter length covers long drops from a control cabinet to a remote field device — think a conveyor-zone sensor or a tank-level transmitter mounted 15 meters from the nearest junction box. The PVC jacket is rated for general industrial environments; if the run passes through a washdown zone, verify the jacket's chemical resistance against your coolant or cleaning agent.
Same part, different passport — genuine is genuine, and this one is sourced to order.