The 3ABD00015775-D is an ABB ACS510 drive in frame R6, rated for 90 kW normal use at 180 A output on a 380–500 V three-phase supply. IP54 and NEMA Type12 enclosure means it handles dust and hose-down environments without an extra cabinet — useful for a line-down swap where the panel's already tight. Standby loss sits at 32 W, so the heat load is modest even if the fan's moving air through a crowded enclosure.
Frame R6 is the physical footprint — check your existing mounting plate clearance before the swap. The 40 °C ambient rating is the standard figure; if the panel runs hotter, the output current needs derating. Frequency range covers 47.5–63 Hz, so it handles 50 Hz and 60 Hz grids without a firmware change. Apparent power output is 125 kV·A, which aligns with the 90 kW / 180 A normal-use rating on a typical 400 V supply. IE2 efficiency class is the baseline for this generation — not the highest tier, but the drive's losses are predictable for panel cooling calcs.