The ABB 3ABD00037932-D is an ACS580-01 general-purpose wall-mounted drive rated for 200 kW normal use at 363 A output current, with a heavy-duty rating of 160 kW / 293 A and a light-overload rating of 200 kW / 345 A. It runs on 380-480 V three-phase input, 47.5-63 Hz, and carries IP21 / NEMA Type 1 enclosure protection. Frame size is R9.
Ratings & fit
The normal-use current (363 A) is what you size the input cable and branch protection for. Heavy-duty (293 A) applies when the drive runs a constant-torque load like a conveyor or extruder at 150% overload for 1 minute. Light-overload (345 A) suits variable-torque pumps and fans where the overload requirement is lower. The 200 kW normal-use power figure assumes a standard 4-pole induction motor at 400 V; derate for 380 V supply or non-standard motors. Efficiency is IE2 class, which meets the minimum for most industrial installations in regions that mandate IE2 for variable-speed drives. The IP21 / NEMA 1 enclosure is fine for indoor panel or wall mounting in a clean environment; if washdown or dust is present, you need a higher IP rating.
Wall-mounted with frame size R9. The enclosure is NEMA 1, meaning it's intended for indoor use with no dripping water or falling dirt. The drive accepts 3-phase input at 380-480 V and outputs up to 363 A continuous. Standard ACS580-01 features include a built-in control panel, basic I/O, and support for fieldbus options via plug-in modules. No special tools or adapter plates are needed for the wall mount.