The ABB 3ABD00039236-D is an ACS880-01 wall-mounted drive rated for 30 kW normal use at 35 A output current on a 525-690 V three-phase supply. That 35 A figure is the continuous rating you size your motor and cabling for under normal duty — it carries a 3-phase induction motor up to that current without derating, provided the ambient stays within the drive's limits.
Frame size R5 tells you the physical envelope — this drive needs cabinet space matching the R5 footprint, so verify your enclosure depth and mounting rail spacing before committing the BOM line. The 525-690 V input range covers 690 V nominal grids common in European industrial plants, but also works on 600 V Canadian systems and 575 V North American installations — check your line voltage falls within that band, not just the nominal. IP21 with NEMA Type 1 means it's built for indoor, clean environments; no washdown rating here, so keep it out of wet or dusty areas unless you add a separate enclosure.
Integration notes
Wall-mounted design with NEMA Type 1 enclosure — mount it directly to a backplate or inside a panel, not on a DIN rail. IE2 efficiency level meets the base standard for motor drives; if your site requires IE3 or IE4 for energy compliance, factor that into the drive selection — this unit won't carry premium efficiency credits.