The ABB 3ABD00039445-D is a low-voltage AC industrial single drive module rated for a normal-use output of 400 kW and 430 A on a 3-phase supply of 525 to 690 V. It carries an IE2 efficiency level and an IP20 open-type enclosure, so it's built for cabinet mounting where the environment is clean and dry. The R10 frame size tells you the physical footprint and the bus-bar layout you'll need to plan for on the panel backplate.
Rated for the real load
This module gives you three duty ratings so you can match it to the application without over-speccing or undersizing. Heavy-duty use drops to 350 kW / 360 A for those times you need extra torque margin on a crusher or a mixer that sees short overloads. Light-overload use pushes to 450 kW / 420 A for variable-torque loads like fans and centrifugal pumps where the peak demand is only during start-up. The frequency range of 47.5 to 63 Hz covers 50 Hz and 60 Hz grids, so it works on both sides of the pond without derating.